How To Thread A Sewing Machine.

Knowing How To Thread A Sewing Machine if crucial to all sewing.

Without thread there is no sewing.   Thread is an essential.  The sewing machine uses thread to join fabrics together. 

To understand How To Thread A Sewing Machine, we must see that the swing machine uses two threads.  One thread fills a bobbin and is inserted under the fabric flow.  One thread is drawn through the eye of the needle from above. 

To produce quality stitches we must understand How To Thread A Sewing Machine.  The sewing machine moves the needle down through the fabric and beyond.  The thread from above is caught by the sewing machine hook and pulled around the bobbin thread.  The needle withdraws and moves up.  It tightens the threads into a locked stitch inside the fabric. 

If you do not understand How To Thread A Sewing Machine you get problems.  Unfortunately, when a sewing machine is not properly threaded, the stitching is distorted or possibly ruined completely.  There are many ways to improperly thread a sewing machine, but only one right way to thread a sewing machine.

This is How To Thread A Sewing Machine.

There are thousands of different models of sewing machines.  Each one has its own unique way to accommodate the threading process.  Yet, they are all essentially the same.  How To Thread A Sewing Machine is essentially the same for all sewing machine.

The upper thread comes wound on a spool.  The spools come in a variety of different shapes and designs, but they all work the same.   The spool of thread is placed over a spool pin which may be horizontally or vertically mounted to the sewing machine.  This depends on the model and How To Thread A Sewing Machine.

A simple and easy way to thread a sewing machine is to draw the thread through, around, and over the various thread guides to the needle.   Sound easy?  It is.  This is How To Thread A Sewing Machine.

Then, why are there so many mistakes made threading a sewing machine?

It must be done perfectly every time.  No mistakes.  This is How To Thread A Sewing Machine.

Begin at the thread spool.  It must be properly placed on the spool.  Draw the thread from right to left.  Draw the thread from the spool pin to the first guide. 

Caution.  Threads often snag  on rough spots on the spool.  Therefore, double check that the thread flows freely off the spool. 

Is the spool pin is horizon?  Use a spool cap just slightly larger than the end of the thread spool.  This is How To Thread A Sewing Machine and prevent snag. 

Is the spool pin rear mounted or vertical spool pins>  You may need a spool net.   This is a special net material used to guide the thread.  You  may need to keep the thread from getting snarled as it flows off the spool pin.  This is How To Thread A Sewing Machine.

Draw the thread through the first thread guide.  Look to the left for another thread guide.  Depending on the machine there may be up to four thread guides from across the top.  Look for guides toward the back and front of the sewing machine.  Many newer machines make this easier by numbering the threading steps.  So you can just follow the numbers.  This is How To Thread A Sewing Machine.

From the thread guides, the thread must be drawn through the tension discs.  Older machines have front mounted tension assemblies.  A few have left side tension assemblies. Most tension assemblies are front mounted.  In older sewing machines they were obvious.  In newer sewing machines the tension assembly may be hidden or encased in the cover. 

Faulty threading through the tensions is a common source of problems.  If the presser foot is down, the thread will ride along the ridge of the tension discs. This prevents them from sliding into the discs properly.    The solution is.  Raise the presser foot lever when you begin threading.  Keep it up until you reach the needle.  This is How To Thread A Sewing Machine.

The thread must follow through the upper thread guides and through the tension discs.  These discs consist of two or more flat round discs that press against the thread during sewing to provide “tension”. 

The thread must flow through the tension spring which helps keep the tension on the thread stable during sewing.  This is How To Thread A Sewing Machine.

Next the thread must flow through the sewing machine take up lever. It must go  back down through any remaining tension guides to the eye of the needle. 

Finally, the thread must flow through the eye of the needle.  However, test before finally threading the needle. 

Test the tension by slightly tugging on the end of the thread.  You should feel very little resistance.  Now drop the presser foot and test again.  (Remember it has been up until now.)  You should feel resistance now.  Finish the threading by threading the needle.  This is How To Thread A Sewing Machine.

How To Thread A Sewing Machine.