Sewing Machine Repair Header Fix Sewing Machines

 

Singer Sewing Machine Dead Help Fix Tips.

What is Singer Sewing Machine Dead Help Fix Tips?  

If you repair sewing machines, you have already or will eventually encounter a sewing machine that is frozen. You need Singer Sewing Machine Dead Help Fix Tips.  The machine is completely locked up.  The shaft will not turn.  The harder you try to turn the hand wheel, the more convinced you become.  You may think to yourself, “Here is another boat anchor.” 

Working on Singer Sewing Machine Dead Help Fix Tips can be very frustrating.  I suppose that no one wants to hear tips when struggling with insurmountable problems.   That is what it feels like when you are working on a locked up sewing machine.  It feels like the whole sewing machine has fused into one lump.  What you need is Singer Sewing Machine Dead Help Fix Tips.

Singer Sewing Machine Dead Head Fix Tips pic.

I can remember many dead head stuck sewing machines.   After a couple of fruitless hours, it feels like there is no point trying any more.  However, if you have the right Singer Sewing Machine Dead Help Fix Tips you can solve the problem.

First, why do sewing machines get dead head stuck?  Why do sewing machines lock up?

There three reasons why sewing machines lock up.  Sewing machines lock up because of neglect.  Sewing machines lock up because of a fluke in the bobbin area.  Sewing machines lock up because of broken parts.

The most common cause of a locked up sewing machine is neglect.  Sewing machines require periodic service.  Old oils and grease dry out and crystallize.  Use of the wrong oils can cause a sewing machine to lock up.  Many oils have paraffin or other ingredients that are harmful to the sewing machine.   Old Oils, grease, debris must be removed.  The sewing machine requires proper lubrication.  When the sewing machine maintenance is neglected, it will eventually lock up.

Singer Singer Machine Dead Help Fix Tips pic2.

Flukes can happen in the bobbin area.  Often the fabrics or threads used can cause problems in the bobbin area.  If thread gets trapped in the race of the hook, the sewing machine will lock up.  If you use very linty fabrics, the lint can bunch up in the bobbin area and cause it to freeze.
 
Sewing machines can also lock up when a part inside the sewing machine breaks.  If a gear breaks a cog, it can lock up. If a lever bends, it can lock up.  If a cam assembly breaks, the sewing machine can lock up.

So what are Singer Sewing Machine Dead Help Fix Tips?  What specific steps can the sewing machine repair man do? 

Here are five Singer Sewing Machine Dead Help Fix Tips.

1. Singer Sewing Machine Dead Help Fix Tips.  When you attempt to turn the hand wheel, the sewing machine is locked up or dead head.  First, remove the bobbin and bobbin carrier.  If the hook assembly is removable, take it out.  Test by turning the hand wheel.  If it is loose, the problem is gunk in the bobbin assembly.

2. Singer Sewing Machine Dead Help Fix Tips.  Remove all the covers.  Test the hand wheel while observing the insides of the sewing machine.  Watch the upper shaft. Examine the lower shaft.   Look for any points where metal touches metal.  Look for any broken parts.

3. Singer Sewing Machine Dead Help Fix Tips.  Remove the power drive of the sewing machine.  Release the belt or other drive mechanism.  Test the hand wheel again.  Is the binding in the motor or drive system.  Sometimes the belt tensioners bind due to inappropriate maintenance.

4. Singer Sewing Machine Dead Help Fix Tips.  Remove all debris, old oils, and grease.  Thoroughly clean the upper and lower sewing machine.  Use carborator cleaner or similar chemical to dissolve an old sticky and gummy lubricants.  Use chemical cleaners as necessary.  Test the hand wheel again.  Beginning at the hand wheel follow the drive mechanisms across the upper and lower parts of the sewing machine.  Force the hand wheel to turn even a slight amount.  Find the points of resistance. 

5. Singer Sewing Machine Dead Help Fix Tips.  If you find a bind between metal parts that just won’t give, add lubricant.  Move the pieces back and forth to loosen and free them.   Work the binding areas until they become free.  In extreme situations, you may use a torch or soldering iron to heat up a binding point.  The heat will dissolve the old lubricants and enable you to free the bind.

Singer Sewing Machine Dead Help Fix Tips.